- Oils for Parquet and Plankflooring
- Industrial application products
- Outdoor and Garden wood
- Laquers for Parquet and Plankflooring
- Prime Design Line
- Maintenance Products
- Cleaning Products
- Pads and Abrasives
- Application Products
- Cleaning systems
- Concrete Grinding
- HTC Machines
- HTC Greyline Machines
- HTC Start & Grind
- Airtec Machines
- Single-disc Machines
- Natural Stone Grinding
- Industrial Vaccumers
- Diamond Tools
- Floorpreparation Segments
- Tool Holder
- Metal Bond Segments
- Plastic Bond Segments
- Edge Processing
- Cup-Grinding Wheels
- Natural Stone
The HTC D30 is a very powerful, single-phase dust extractor with three large vacuum motors. Three HEPA H13 filters, as well as a conical filter with a 4.5 m² filter surface, enables the HTC D30 to effectively collect both coarse and fine dust. It’s also equipped with time counter, vacuum gauge and Longopac® system for safe dust handling.
The international standard for testing dust and water extractors (IEC-60335-2-69, EN-60335-2-69) encompasses three classes – L for low, M for medium and H for high – with the H class being the most stringent (do not confuse this “H” with the one in HEPA H13). HTC D10, D20 and D30 are H classified.
HEPA (High Efficiency Particulate Air) is a highly efficient particle filter for air. The stringent HEPA standard (EN 1822-1) is divided into different levels (E10 to H14) depending on the filter efficiency. HTC uses level H13, which can separate up to 99.95% of the particles in sizes 0.15 to 0.30 μm. These particle sizes are the most difficult to separate – both larger and smaller particles are easier to catch in a filter. Besides this, HTC tests each individual filter prior to delivery to ensure that they comply with the HEPA H13 standard.
3-step filtration for your safety
- The cyclone separates the largest particles, which go to the Longopac bags.
- The prefilter (conical filter) handles the finer dust that is not separated in the whirler.
- Lastly, the air passes through a certified HEPA H13 filter that separates 99.95% of the smallest and most dangerous particles.
Find out when it's time to clean or change filters.
H-classified assortment for your safety
HTC D10, D20 and D30 are all in compliance with the highest international standard “H”. (IEC-60335-2-69, EN60335-2-69)
Effective filter cleaning
Easily and effectively clean the primary filter to maintain high airflow.
Dust extractors effectively separate the dust into three steps with a whirler, primary filter and HEPA H13 filter.
Handle dust easily and safely in Longopac® collection bags.
- Motor: 3.6kW
- Voltage: 120V, 20A
- Weight: 63kg
Additional product information is available in the attached documents.